Tineco FLOOR ONE S3 vs. BISSELL CrossWave Cordless Max [Honest Comparison]

Updated: 4th August 2021

This is an in-depth comparison review of Tineco FLOOR ONE S3 vs. BISSELL CrossWave Cordless Max (2554A), the two most advanced and efficient wet/dry vacuum mop combo systems from Tineco and BISSELL, respectively.

Tineco FLOOR ONE S3 is a smart, cordless vacuum mop featuring an intuitive LED display and automatic cleaning adjustment mechanism. BISSELL CrossWave Cordless Max is a multi-surface, cordless vacuum mop that connects to BISSELL Connect and Amazon Dash Replenishment. 

Both are high-end premium products. Therefore, you should invest your money wisely. Read this side-by-side comparison to identify the best smart vacuum mop as per your requirements.


Powerful suction, cordless, compact, lightweight, decent tank capacities, smart cleaning technology, 35-minute run time, LED display, app connectivity, voice support

Powerful suction, cordless, compact, lightweight, large tank capacities, suitable for pet stains, multi-surface cleaning, 30-minute run time, LED display, app connectivity

Disclaimer — As an Amazon Associate, I earn from qualifying purchases.

Features Comparison: A Side-by-Side Analysis

SpecificationsTineco FLOOR ONE S3BISSELL CrossWave Cordless Max
Dimensions (D x W x H)11.3 × 10 × 43.3 inches10.5 × 10.25 × 45.5 inches
Weight9.9 lbs11.5 lbs
Power sourceBattery-poweredBattery-powered
Battery capacity4,000 mAh 21.6V36V
Running time35 minutes30 minutes
Charging time4 +/- 0.5 hours4 hours
Tank capacities (Clean water & dirty water)CWT – 0.6 L DWT – 0.5 LCWT – 0.83 L DWT – 0.55 L
Cleaning technologyAUTO mode, MAX mode, HEPA FilterHard Floor mode, Area Rug mode, Edge cleaning
Self-cleaning technologySmart, Self-Clean ModeSmart, Self-Clean Mode
Smart technologyEmpty CWT/Full DWT/Roller Blockage Alarm, iLoop Sensor Interaction, Auto-Control Water Flow & SuctionWiFi connectivity, App integration
App integrationYES (Tineco)YES (BISSELL Connect)
Tools & Accessories3-in-1 Cleaning Tool, 3-in-1 Docking Station, Charging Adapter, Extra Brush Roller  3-in-1 docking station, 2 multi-surface brush rolls, Charging adapter  
Surface/Floor typeAll types of hard floors – laminate, linoleum, vinyl, hardwood, engineered wood, marble, stone, concrete, tileAll types of hard floors & area rugs – laminate, linoleum, vinyl, hardwood, engineered wood, marble, stone, concrete, tile
Stains typeAll fresh and set-in stains like pet messes & hair, food and beverages, grease, makeup, dirt, grime, mud, mold/fungusAll fresh and set-in stains like pet messes & hair, food & beverages, grease, makeup, dirt, grime, mud, mold/fungus
Cleaning formulaDeodorizing & Cleaning Solution2 × 8-oz multi-surface formula, 2 × 8-oz hard floor sanitize formula
Warranty2 years2 years
PriceCheck on AmazonCheck on Amazon

Detailed Comparison: What’s the difference between Tineco FLOOR ONE S3 vs. BISSELL CrossWave Cordless Max?

Tineco FLOOR ONE S3 vs. BISSELL CrossWave Cordless Max Comparison
Graphical representation of the comparison

Pros & Cons

Tineco FLOOR ONE S3BISSELL CrossWave Cordless Max
-Powerful suction
-35-minute run time
-Easy to use & clean
– Automatic power & solution adjustment
– Mobile app integration & voice support  
-Powerful suction
-Superior edge cleaning
-Easy to use & clean
-Suitable for hard floors and area rugs
-Mobile app integration
-Not suitable for area rugs
– Expensive
Buy on AmazonBuy on Amazon


Tineco FLOOR ONE S3 is a battery-powered appliance, driven by a 4,000 mAh (21.6V) battery that delivers a run time of around 35 minutes in the AUTO mode and 25 minutes in the MAX mode. In the AUTO mode, the iLoop® Sensor technology adjusts power and solution according to the degree of messiness on the floor. The MAX mode throttles the 220W motor, delivering maximum power to remove the most stubborn stains. The FLOOR ONE S3 is perfect for hard floor cleaning but doesn’t work on carpets and rugs.

BISSELL CrossWave Cordless Max comes to your rescue for multi-floor cleaning. The battery-powered appliance driven by a 36V Li-ion battery delivers a run time of approximately 30 minutes. It features two cleaning modes – Hard Floor mode for hard floors and Area Rug mode for rugs and carpets. The Cordless Max covers edges, thereby helping you clean efficiently. The suction is powerful, equivalent to what you get in the FLOOR ONE S3.

My Verdict: If you are looking for a multi-surface vacmop, go ahead with BISSELL CrossWave Cordless Max. And if hard floor cleaning is a priority, Tineco FLOOR ONE S3 is the best.

Ease of Use

Both of these smart appliances are designed to render maximum convenience to the users. FLOOR ONE S3 and Cordless Max share a lot of common features that enhance ease of use. These include cordless functioning, a swiveling head, two-tank technology, one-click self-cleaning technology, mobile app integration, dock station charging and storage, and more.

Tineco FLOOR ONE S3 goes a step further as it voices commands whenever there’s a problem, like low battery or the brush roller blockage, for example. If not a fan of voice commands, simply keep a check on indicators on the LED display. Further, you can check on performance parameters from the Tineco app on your smartphone. Switching between cleaning modes just takes a 3-second press on the button. However, CWT capacity (0.6L) is average which may empty faster in the MAX mode.

Official video of Tineco FLOOR ONE S3

BISSELL CrossWave Cordless Max doesn’t have a voice command feature, but the LED display shows prominent indicators like DWT full, the cleaning mode, and battery status. It also connects to the BISSELL Connect app and Amazon Dash Replenishment. Hence, you can keep a check on your machine and also set up automatic orders on Amazon. Here also, there’s a single button to switch between cleaning modes. Efficient edge cleaning is a big plus. CWT capacity (0.83L) is also a bit higher here.

My Verdict: It’s a tie.

Ease of Maintenance

There are three core aspects in ease of maintenance concerning these two smart vacuum mops – cleaning components, self-cleaning, and warranty.

After every hard floor/rug cleaning session, you’ll have to thoroughly clean all components including DWT, floater, filter, brush roll, brush roll cover, chamber, and nozzle. In FLOOR ONE S3, wipe the filth accumulated on the sensor (placed below the DWT). In Cordless Max, you’ll have to rinse and clean the pet strainer as well, placed inside the DWT for trapping pet hair and other messes.

Official video of BISSELL CrossWave Cordless Max

Self-cleaning technology is present in both appliances. Just place the units on the 3-in-1 docking station, plug in the charging cord, fill CWT with clean water, and press the self-cleaning button to activate the process. At last, empty and rinse the DWT. The self-cleaning procedure works if you’ve used the vacuum mops for regular floor cleaning. But in case of heavy messes, consider thorough cleaning of components, and not just self-cleaning.

Lastly, both Tineco and BISSELL offer a 2-year warranty on FLOOR ONE S3 and CrossWave Cordless Max, respectively.

My Verdict: It’s a tie, again.


Tineco FLOOR ONE S3 weighs around 9.9 lbs, making it one of the lightest vacuum mops for your hard floors. You can carry it upstairs or downstairs with ease. There’s no carry handle on the unit, though. You’ll have to hold it from the stem. The compact design also favors ease of storage. And as there’s the 3-in-1 docking station, you know where to keep it after every cleaning session.

At 11.5 lbs, BISSELL CrossWave Cordless Max is slightly heavier than the FLOOR ONE S3. However, it doesn’t make much of a difference when it comes to portability. Hence, you can carry it comfortably inside your home and to your shop or office. There’s a carry handle on top that facilitates a firm grip. It also flaunts a compact, stylish body that fits comfortably on the 3-in-1 docking station.

My Verdict: Tineco FLOOR ONE S3 wins for its lightweight body and compact design.


Tineco FLOOR ONE S3 is a dedicated hard floor cleaner suitable for surfaces like laminate, linoleum, vinyl, hardwood, engineered wood, marble, stone, concrete, and tile. The machine and the deodorizing & cleaning solution do a fantastic job of eliminating fresh and old stains of all types, whether solids or liquids. However, when fighting tough stains, use the appliance in the MAX mode for best results.

BISSELL CrossWave Cordless Max trumps over FLOOR ONE S3 in this segment as it’s capable of cleaning both hard floors and rugs. For best results, you can use the multi-surface formula that comes with the purchase or order any other cleaning solution of your choice. Note that although Cordless Max works on area rugs, it’s not suitable for deep cleaning. For this, you must consider a full-sized carpet cleaner, perfect for carpet and rug cleaning.

My Verdict: For hard floor cleaning, FLOOR ONE S3 is the winner. Overall, BISSELL CrossWave Cordless Max is the winner.   

Customer Reviews

The users shower praises on Tineco FLOOR ONE S3 for its terrific capability to clean hard floors, ease of use, ease of maintenance, compact and lightweight design, sufficient running time, and smart functioning. Some users say that one full charge is enough for an area up to 600 square feet, but for a larger area, you again need to wait 4 hours (time required for a full charge). Lastly, you’ll have to self-clean it frequently if you want the best performance output every time you use it.

BISSELL CrossWave Cordless Max is a favorite of many customers because of its powerful cleaning, multi-surface compatibility, special emphasis on pet stains, sturdy build, long-lasting battery, ease of use, and ease of maintenance. The downsides include a high price tag and average performance when it comes to deep cleaning of rugs and carpets.

My Verdict: Tineco FLOOR ONE S3 wins for its massive fan following. However, BISSELL has its following of ardent believers.

Which one is the best: Tineco FLOOR ONE S3 or BISSELL CrossWave Cordless Max?

 Tineco FLOOR ONE S3BISSELL CrossWave Cordless Max
PerformanceWins for hard floor cleaningWins for multi-surface cleaning
Ease of UseTieTie
Ease of MaintenanceTieTie
Versatility Wins
Customer ReviewsWins 
Check on Amazon
Check on Amazon

Which one will you buy: Tineco FLOOR ONE S3 or BISSELL CrossWave Cordless Max?

The only major factor that distinguishes Tineco FLOOR ONE S3 from BISSELL CrossWave Cordless Max is that the former is designed for hard floors and the latter for multi-surface cleaning. Other than this, both of these vacuum mop combo systems are smart, efficient, and lean machines.

Buy Tineco FLOOR ONE S3 for mind-blowing hard floor cleaning, intuitive LED display, app support, portability, and sleek design.

Go ahead with BISSELL CrossWave Cordless Max for its multi-surface cleaning, app support, Amazon Dash Replenishment integration, and robust design.

Must Read

Is there anything else you want to know before making a move? If yes, then drop your queries below.

Now if you think this post deserves a share or someone needs to see this right now, feel free to forward it to your circle.

Clean Homez
Authored By

The Editorial Team

After countless hours of research and scribbles, Clean Homez’ content creators bring to you the original, finest, detailed, and well-formatted content. The creators are experts in their domains and have profound knowledge of house cleaning & related chores.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.